Tellurium Q Best cables in the world
Tellurium Q® : Our Focus
Tellurium Q® have been asked many times why our cables perform differently to others. We are not going to pass on the exact details of what we are doing to achieve the performance that the reviews and multiple product of the year awards talk about, however time moves on and so it is time to talk a little more about the how.
When Tellurium Q® was set up the focus was primarily on phase distortion and minimising this problem inherent in all cabling, whoever makes them and where ever and however they are made. The reason it is a problem is simple, all materials (not just cables) in the path of a signal will act as an electronic filter according to the definition in the box below, whether you want it to or not. This is undeniable.
Please understand we use the word filter as its scientific definition and not necessarily as something being “filtered out” like with a mechanical sieve. We are primarily focussed on removing the smearing of frequencies through a timing shift and by doing this you get better clarity and transparency from Tellurium Q® cables.
This is the definition of an electronic filter:
“A filter is an electrical network that alters the amplitude and/or phase characteristics of a signal with respect to frequency. Ideally, a filter will not add new frequencies to the input signal, nor will it change the component frequencies of that signal, but it will change the relative amplitudes of the various frequency components and/or their phase relationships.”
Source: National Semiconductor Corporation
N.B. This is true of all speakers, amplifiers, DACs, CD players, cables etc…in fact anything in the signal path.
Once you accept the fact that your audio system is acting as multiple electronic filters smudging your music, then you have a choice:
a. Forget the cable is an electronic filter (completely in the face of science) and compromise by having a smeared sound or
b. Do something about it and engineer as clear and phase neutral a path for the signal as possible to get the most transparent sound that current technology will allow and preserve the original signal phase relations as much as possible.
Unfortunately it is not as easy as just looking at a chart of materials and simply picking the one with the best conductivity. If that were the case then you would put some silver wire in place and the job would be done.
Relative conductivities of various metals assuming copper to be 100%
Image © Tellurium Q Ltd March 2015
Some time ago we had some pure silver connectors manufactured and like all our developments tested them in a double blind situation. These we put against silver plated connectors using various base metal mixes and various thicknesses of plating. The pure silver performed worse than a plated connector with a “certain” thickness of plating. It was sluggish and almost muffled by comparison.
The more you focus on the fact that you are working with an electronic filter, then the easier it becomes to craft a much more transparent and natural sounding cable engineering each part of the signal path to minimise distortion. But there is a huge downside to this as every little detail of the constituents used and construction has to be tested in multiple configurations….and of course listened to.
The cable construction becomes more complex, using multiple stranded conductors of slightly differing materials and various dielectric materials and geometries. We have to pay attention to every part of each of our processes, even using non-industry standard solder mixes that varied between cables. Raw ingredients for the construction are highly specified as are plating thicknesses, even down to specifying what chemicals should or should not be included in a plating bath.
Let us give you an example of what we are talking about. These two plated finishes (both silver plating) conduct differently to one another.
The shiny finish is less conductive because of the additives used for that finish when plated. However that is not a great issue when you take into account the material underneath, cable construction and any other plated layers – we still end up with a very transparent cable assembly. It is all a very carefully balanced set of ingredients that become more than the sum of their parts.
Although cables should not affect the sound there are factors that have to be considered because audio systems are not perfect and customers have listening preferences too. So you will see we have engineered three distinct families of sound to take account of three distinct demands our customers have asked for. Which is why we have the Silver and Blue ranges as well as the Black which help achieve this for our customers:
Silver range: The sound can best be described as silver but without the fatigue and harshness that can go along with that material.
Black range: the natural / transparent range that allows an incredibly life like reproduction for use in a well balance system to simply unlock what the system can do.
Blue range: slight warmth that just takes the harsh top edge out of a system that is a little brittle or bright.
So now you know why our cables have won so many awards and we have grown so quickly. We have taken a different and radical approach by looking at the “problem” of cables because they are “secret electronic filters” and you ignore that at your listening peril.
By thinking of cables in this way we can get closer to our goal of combating phase distortion (or more accurately, preserving relative phase relationships in a signal) giving you the most transparent, natural sound possible.You can think of it like a blurred picture becoming clear
We would like you to have the most clear, transparent and natural listening experience and so hope that you get the opportunity to hear the results of our work for yourself.
6 products of the year in 2014
Stereo Times Most Wanted Components 2015 (USA)
Hifi World product of the year 2015
High Fidelity products of the year 2014 and 2015
Speaker cable and interconnect of the year 2014
Mains cable of the year 2014
Mains cable of the year 2012
HIfi World products of the Year 2012
HiFi News Highly Commended Jan 2010
HiFi Plus Products of the Year 2010
HiFi World Cable of the Year 2010
Hi Fi Choice 5 stars 2012
Hifi World 5 Globes August 2010, 2011 2012, 2013, 2014 & 2015